top of page
Power Bulge S800 50 x 16 x 3 cms

Power Bulge S800 50 x 16 x 3 cms


Interested in the S800 - 50 x 36 x 3 cms? Call us now on 07565 109 108 to speak with our friendly advisors and arrange a purchase.


    Size: 50 x 36 x 3 cms

    There is an approx 1 inch lip left on, trim to suit. The dimensions are taken from the inside at the maximum points, the 1 inch lip is not included in the has a cut out at the front to allow additional air flow through into the engine.


    Fitting: The Bulge can be pop riveted on or alternatively, it can be bonded on using a silicone based adhesive, available at your local Motor Factors, then blended in.


    Paint Prep: Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well.  Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.

bottom of page