Morris 1000 Rear Bumper Valance
Interested in the Morris 1000 Rear Bumper Valance? Call us now on 07565 109 108 to speak with our friendly advisors and arrange a purchase.
Application: This valance is a direct replacement panel for the originals, incorporating the bumper and valance panels.
Durability: This valance is made for road use.
Bolt Holes: We don’t pre-drill any bolt holes, it is far better to line the panel up and drill the holes where needed, also any holes in the panel make it more fragile and susceptible to damage in transit. Bolt holes are marked in the panel which can be used as a guide. Tip: drill elongated holes to give room for adjustment when fitting.
Fitting: This valance fits flush on the car. Mark and drill the holes to the corresponding captive nuts on the car, the existing bolts can be re-used if you wish.
Paint Prep: Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well. Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.