Power Bulge MGC 35 x 13 x 3 cms
Postage = £18
Domestic Shipping: Stated postage only applies to mainland UK and does not include Highlands, Offshore Islands, Northern Ireland, Ireland. If you are in any of these areas please send us your postcode and we will obtain a quote for you.
International Shipping: We ship worldwide so if you are not from UK please send us your full address including area code and we will obtain a shipping quote for you.
PRODUCT INFO
Size: 35 x 13 x 3 cms
There is an approx 1 inch lip left on, trim to suit. The dimensions are taken from the inside at the maximum points, the 1 inch lip is not included in the sizes.so has a cut out at the front to allow additional air flow through into the engine.
Fitting: The Bulge can be pop riveted on or alternatively, it can be bonded on using a silicone based adhesive, available at your local Motor Factors, then blended in.
Paint Prep: Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well. Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.