MGB Sebring Std Rear Arches, pair

Application:    These Arches have been designed to be attached to the existing steel bodywork to achieve the Sebring look.

Durability:    These Arches are suitable for road use or racing.  An additional layer of matting is applied on areas for the attachment points or where holes need to be drilled.

Fitting:    There are two options for fitting, the arches can be pop riveted on at approx an inch apart, and then blended in with body filler - we suggest Plastic Padding (elastic type) as this is a more flexible filler.  Alternatively, they can be bonded on using a silicone based adhesive, available at your local Motor Factors, then blended in as suggested above.

Paint Prep:    Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well.  Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.