top of page
MGB Roadster Bootlid + Spoiler, with internal panel + captive nuts, Lightweight

MGB Roadster Bootlid + Spoiler, with internal panel + captive nuts, Lightweight

SKU: GGMGB316
£210.00Price

Interested in the MGB Roadster Bootlid with Spoiler? Call us now on 07565 109 108 to speak with our friendly advisors and arrange a purchase.

  • PRODUCT INFO

    Application:        This Bootlid fits all Roadster models, it is an alternative style bootlid.

     

    Captive Nuts:     At the rear there are three x 6mm captive nuts on each side for the hinges. Then there are two x 5mm captive nuts on the front, with an aperture for the locking mechanism.

     

    Durability:           This panel is manufactured for racing with one full layer of matting with a strip around the edge.

     

    Bolt Holes:          We don’t pre-drill any bolt holes, it is far better to line the panel up and drill the holes where needed, also any holes in the panel make it more fragile and susceptible to damage in transit.  Bolt holes are marked in the panel which can be used as a guide.  Tip: drill elongated holes to give room for adjustment when fitting.

     

    Fitting:                  Transfer over all existing fitting attachments and fit as per the original Bootlid.

     

    Paint Prep:          Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well.  Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.

bottom of page