top of page
MGA Front Valance, Sebring, with Air Vents

MGA Front Valance, Sebring, with Air Vents


Interested in the MGA Front Valance? Call us now on 07565 109 108 to speak with our friendly advisors and arrange a purchase.


    Application:    This is an alternative style valance to the standard. 


    Durability:    All valances are suitable for road use or racing.  An additional layer of matting is applied on areas for the attachment points or where holes need to be drilled.


    Bolt Holes:    We don’t pre-drill any bolt holes, it is far better to line the panel up and drill the holes where needed, also any holes in the panel make it more fragile and susceptible to damage in transit.  Bolt holes are marked in the panel which can be used as a guide. Tip: drill elongated holes to give room for adjustment when fitting.


    Fitting:    This valance has a return lip at the top enabling attachment from behind the grille and inside the wings at the bottom. The lip may need to be trimmed, so the valance pushes back so it has a good flush fit.  The valance can be fitted in your preferred way, either using nuts and bolts or bonded on using ‘body mastic’. Finally apply a small amount of body seam sealer or filler to blend the join.

    Paint Prep:    Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well.  Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.

bottom of page