MGB Door Roadster, LH
Interested in the MGB Door? Call us now on 07565 109 108 to speak with our friendly advisors and arrange a purchase.
PRODUCT INFO
Application: These moulds have been taken off steel original doors. They can be used for road, rally or racing use.
Durability: Unless specified otherwise at time of order, the doors will be manufactured to the sturdy road use standard with two full layers of matting used for overall strength and an additional layer of matting applied on areas for the attachment points or where holes need to be drilled.
Bolt Holes: We don’t pre-drill any bolt holes, it is far better to line the panel up and drill the holes where needed, also any holes in the panel make it more fragile and susceptible to damage in transit. Bolt holes are marked in the panel which can be used as a guide. Tip: drill elongated holes to give room for adjustment when fitting.
Fitting: The fitting of these doors is quite an intricate process; all the internal fittings will need to be transferred over from your existing doors.
Paint Prep: Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well. Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.