MGB Bonnet Race Style, with internal panel + captive nuts, Road Use

Application:        This Bonnet fits the GT and Roadster models, it is an alternative style panel for the original Bonnet. 

 

Captive Nuts:     At the rear there are two steel brackets for the hinges, at the front there is a 3/8” AF threaded plate to take the locking pin and three 5mm captive nuts bonded in to take the safety catch.

 

Durability:           This panel is manufactured for road use with two full layers of matting used for overall strength.  For extra durability, an additional layer of matting is applied on areas for the attachment points or where holes need to be drilled.

 

Fitting:                  Transfer over all existing fitting attachments and fit as per the original Bonnet.

 

Paint Prep:          Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well.  Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.